flying wing epp lipos speed controllers u-cut slipstream buzz chargers electric flight







		Slipstream viper Our latest version of the Slipstream breaks new ground in performance for the cost. As with all Slipstreams, its 100% EPP and very very tough. The deal package comes with a 2600kv brushless motor, 25amp speed controller, propeller and adaptor.


				Due to customer demand, we have introduced Slipstream 1 metre EPP wing kits. As per all the Slipstream range, we only use the finest components like EPP, Carbon Fibre and stainless steel, here's what you get > 100% EPP CNC pre-cut & drilled wing cores > Pre cut hard stock balsa elevons > 3 x carbon spars > 2 x Laser cut correx vector wing tips > Steel pushrods & clevises > Laser cut stainless steel motor mount (e version only) > Plastic horns & screws > Pre cut ply wing plates > Velcro strap & Epp hatch sheet > Self adhesive vinyl graphic > Comprehensive instructions with cut out templates > Telephone & email support Build the UK's favourite wing now !

				GONE IN 6 SECONDS - Point the nose up, full power and its in the clouds, come down approaching 100mph with the sound of a F1 car, pull immense G-force, no flexing or flapping. Stable at high speed, a pussy cat at 10mph. The ultimate wing !! The Slipstream EBX represents the next generation of EPP electric powered flying wing. We have worked hard on creating a wing section and profile that suits electric flight giving it amazing speed, handling and flight duration. Includes: 2815-3000 brushless motor with adaptor & prop 40 amp brushless speed controller

				The ultimate Park Flier is here. It's very tough and great for combat or just fun flying. It makes a good trainer too. Each Buzz comes ready covered and hinged, making it very quick to finish. The FSK package includes a Towerpro 2408-21 Brushless motor and 18 amp ESC, wobbly prop adaptor, 8x6 prop installed.

				The all new HyperFlea has been designed from the ground up for higher speeds and stability. Featuring a new, sleeker canopy, 3 degree sharper delta, lengthened airframe, wingtips and larger elevons. These changes allow the model to attain higher speeds then previous models. Cut from high density EPP foam, it holds steady at speed and has tremendous damage resistance. Kit Includes: Assembled and sprayed Hyperflea foam parts CF2805 Brushless Motor 18Amp Speed Controller APC 6x4 prop and adaptor The Stall Resistant, Ultra Stable, Ultra Predictable HyperFlea will do it ALL! Assembly time is under 4 hours with flights that can last 10 minutes or more!

				We noticed that many electric trainers on the market were not designed to be stable and very very tough. Well here it is, the V- Trainer EPP. Every element of this design was developed using raw beginners and analysing what helps in learning and what does not ! It is stable, can fly in winds, very strong, easy to repair, comes in a complete package with power system and transferable components, and spares are cheap, too! The V-Trainer features 100% EPP construction 2 Carbon spars V-Tail for strength and simplicity Short stubby nose which takes a pounding Rear mounted brushless motor, almost impossible to damage.

				Described as the new depron, EPP foam is strong, flexible, light and now available as sheet and block in 3 colours. You can make virtually any type of model from a super tough fast combat wing to 3D foamy models and ultra light indoor models. We have sheet from 2mm thick to big blocks for hot wire cutting.